App reference: container names, ports and folders
Use this page to look up how an app is set up by default. It covers container names, ports, the folders an app sees inside its container, and which apps have a Docker health check.
The tables show the defaults. Your own files are the final word. See Check your own files.
Container names and ports
Section titled “Container names and ports”To connect one app to another, use container-name:internal-port. See Connect your apps to each other for the steps and for what to avoid.
- Internal port is the port inside the container. Use it when one container talks to another.
- .env port variable holds the port you use in your browser. Deployrr asks for it at install and saves it in your
.envfile.
For the difference between the two ports, watch Docker Compose media server guide at 26:29 (manual Docker Compose setup). To understand how apps reach each other by container name, see UDMS part 14: connecting apps with container names (manual setup).
| App | Container name | Internal port | .env port variable | Extra ports |
|---|---|---|---|---|
| Adminer | adminer |
8080 | ADMINER_PORT |
|
| Airsonic-Advanced | airsonic-advanced |
4040 | AIRSONICADVANCED_PORT |
|
| Audiobookshelf | audiobookshelf |
80 | AUDIOBOOKSHELF_PORT |
|
| Autobrr | autobrr |
7474 | AUTOBRR_PORT |
|
| Baikal | baikal |
80 | BAIKAL_PORT |
|
| Bazarr | bazarr |
6767 | BAZARR_PORT |
|
| Beets | beets |
8337 | BEETS_PORT |
|
| Bookstack | bookstack |
80 | BOOKSTACK_PORT |
|
| Boxarr | boxarr |
8888 | BOXARR_PORT |
|
| cAdvisor | cadvisor |
8080 | CADVISOR_PORT |
|
| Calibre | calibre |
8080 | CALIBRE_PORT |
8081 (CALIBRE_WEBSERVER_PORT) |
| Calibre-Web | calibre-web |
8083 | CALIBREWEB_PORT |
|
| Change-Detection | change-detection |
5000 | CHANGEDETECTION_PORT |
|
| Chromium | chromium |
3000 | CHROMIUM_PORT |
|
| Cleanuparr | cleanuparr |
11011 | CLEANUPARR_PORT |
|
| Cloud Commander | cloud-commander |
8000 | CLOUDCOMMANDER_PORT |
|
| CrowdSec | crowdsec |
8080 | CROWDSEC_PORT |
|
| CyberChef | cyberchef |
8000 | CYBERCHEF_PORT |
|
| Dashy | dashy |
8080 | DASHY_PORT |
|
| DDNS Updater | ddns-updater |
8000 | DDNSUPDATER_PORT |
|
| Deployrr Dashboard | deployrr-dashboard |
3000 | DEPLOYRRDASHBOARD_PORT |
|
| DigiKam | digikam |
3000 | DIGIKAM_PORT |
|
| Dispatcharr | dispatcharr |
9191 | DISPATCHARR_PORT |
|
| Dockhand | dockhand |
3000 | DOCKHAND_PORT |
|
| Dockpeek | dockpeek |
8000 | DOCKPEEK_PORT |
|
| Dockwatch | dockwatch |
80 | DOCKWATCH_PORT |
|
| DokuWiki | dokuwiki |
80 | DOKUWIKI_PORT |
|
| Double Commander | double-commander |
3000 | DOUBLECOMMANDER_PORT |
|
| Dozzle | dozzle |
8080 | DOZZLE_PORT |
|
| Dozzle Agent | dozzle-agent |
7007 | DOZZLEAGENT_PORT |
|
| DweebUI | dweebui |
8000 | DWEEBUI_PORT |
|
| Emby | emby |
8096 | EMBY_PORT |
8920 |
| ESPHome | esphome |
6052 | ESPHOME_PORT |
|
| FileZilla | filezilla |
3000 | FILEZILLA_PORT |
|
| Flame | flame |
5005 | FLAME_PORT |
|
| Flaresolverr | flaresolverr |
8191 | FLARESOLVERR_PORT |
|
| Flowise | flowise |
Same as FLOWISE_PORT (default 5023) |
FLOWISE_PORT |
|
| FreshRSS | freshrss |
80 | FRESHRSS_PORT |
|
| Funkwhale | funkwhale |
80 | FUNKWHALE_PORT |
|
| GameVault | gamevault |
8080 | GAMEVAULT_PORT |
|
| Glances | glances |
61208 | GLANCES_PORT |
|
| Gonic | gonic |
80 | GONIC_PORT |
|
| Grafana | grafana |
3000 | GRAFANA_PORT |
|
| Grocy | grocy |
80 | GROCY_PORT |
|
| Guacamole | guacamole |
8080 | GUACAMOLE_PORT |
|
| Heimdall | heimdall |
80 | HEIMDALL_PORT |
|
| Homarr | homarr |
7575 | HOMARR_PORT |
|
| Homepage | homepage |
3000 | HOMEPAGE_PORT |
|
| Homer | homer |
8080 | HOMER_PORT |
|
| Immich | immich |
2283 | IMMICH_PORT |
|
| InfluxDB | influxdb |
8086 | INFLUXDB_PORT |
|
| IT-Tools | it-tools |
80 | ITTOOLS_PORT |
|
| Jackett | jackett |
9117 | JACKETT_PORT |
|
| Jellyfin | jellyfin |
8096 | JELLYFIN_PORT |
|
| Jellyseerr | jellyseerr |
5055 | JELLYSEERR_PORT |
|
| Kasm | kasm |
443 | KASM_PORT |
3000 (KASM_INSTALLATION_PORT) |
| Kavita | kavita |
5000 | KAVITA_PORT |
|
| Komga | komga |
25600 | KOMGA_PORT |
|
| Langfuse | langfuse |
3000 | LANGFUSE_PORT |
|
| Lidarr | lidarr |
8686 | LIDARR_PORT |
|
| Lollypop | lollypop |
3000 | LOLLYPOP_PORT |
|
| Maintainerr | maintainerr |
6246 | MAINTAINERR_PORT |
|
| MariaDB | mariadb |
3306 | MARIADB_PORT |
|
| Mosquitto | mosquitto |
1883 | MOSQUITTO_PORT |
9001 websocket (MOSQUITTO_WS_PORT) |
| MQTTX-Web | mqttx-web |
80 | MQTTXWEB_PORT |
|
| Mylar3 | mylar3 |
8090 | MYLAR3_PORT |
|
| n8n | n8n |
5678 | N8N_PORT |
|
| Navidrome | navidrome |
4533 | NAVIDROME_PORT |
|
| Nextcloud | nextcloud |
80 | NEXTCLOUD_PORT |
|
| Nginx Proxy Manager | npm |
81 | NPM_ADMIN_PORT |
80 and 443 |
| Node Exporter | node-exporter |
9100 | NODEEXPORTER_PORT |
|
| Node-RED | node-red |
1880 | NODERED_PORT |
|
| Notifiarr | notifiarr |
5454 | NOTIFIARR_PORT |
|
| NZBGet | nzbget |
6789 | NZBGET_PORT |
|
| Ollama | ollama |
11434 | OLLAMA_PORT |
|
| Ombi | ombi |
3579 | OMBI_PORT |
|
| Open-WebUI | open-webui |
8080 | OPENWEBUI_PORT |
|
| OpenHands | openhands |
3000 | OPENHANDS_PORT |
|
| Organizr | organizr |
80 | ORGANIZR_PORT |
|
| Overseerr | overseerr |
5055 | OVERSEERR_PORT |
|
| Paperless-AI | paperless-ai |
3000 | PAPERLESSAI_PORT |
|
| Paperless-NGX | paperless-ngx |
8000 | PAPERLESSNGX_PORT |
|
| PdfDing | pdfding |
8000 | PDFDING_PORT |
|
| pgAdmin | pgadmin |
80 | PGADMIN_PORT |
|
| phpMyAdmin | phpmyadmin |
80 | PHPMYADMIN_PORT |
|
| Pi-hole | pihole |
80 | PIHOLE_PORT |
53 (TCP and UDP), 67 (UDP) |
| Piwigo | piwigo |
80 | PIWIGO_PORT |
|
| Plex | plex |
32400 | PLEX_PORT |
3005, 8324, 32469, 1900 (UDP), 32410 and 32412 to 32414 (UDP) |
| Portainer | portainer |
9000 | PORTAINER_PORT |
|
| PostgreSQL | postgresql |
5432 | POSTGRESQL_PORT |
|
| PrivateBin | privatebin |
8080 | PRIVATEBIN_PORT |
|
| ProjectSend | projectsend |
80 | PROJECTSEND_PORT |
|
| Prometheus | prometheus |
9090 | PROMETHEUS_PORT |
|
| Prowlarr | prowlarr |
9696 | PROWLARR_PORT |
|
| Pulse | pulse |
7655 | PULSE_PORT |
|
| qBittorrent | qbittorrent |
8080 | QBITTORRENT_PORT |
|
| Qdrant | qdrant |
6333 | QDRANT_PORT |
6334 |
| Radarr | radarr |
7878 | RADARR_PORT |
|
| Redis | redis |
6379 | REDIS_PORT |
|
| Redis Commander | redis-commander |
8081 | REDISCOMMANDER_PORT |
|
| Remmina | remmina |
3000 | REMMINA_PORT |
|
| Resilio-Sync | resilio-sync |
8888 | RESILIOSYNC_PORT |
55555 |
| SABnzbd | sabnzbd |
8080 | SABNZBD_PORT |
|
| Scrutiny | scrutiny |
8080 | SCRUTINY_PORT |
|
| SearXNG | searxng |
8080 | SEARXNG_PORT |
|
| SmokePing | smokeping |
80 | SMOKEPING_PORT |
|
| Sonarr | sonarr |
8989 | SONARR_PORT |
|
| Speedtest Tracker | speedtest-tracker |
80 | SPEEDTEST_TRACKER_PORT |
|
| Stirling PDF | stirling-pdf |
8080 | STIRLINGPDF_PORT |
|
| Supabase | supabase-kong |
8000 | SUPABASE_PORT |
See the note below the table |
| Tautulli | tautulli |
8181 | TAUTULLI_PORT |
|
| Termix | termix |
8080 | TERMIX_PORT |
|
| The Lounge | thelounge |
9000 | THELOUNGE_PORT |
|
| Theme Park | theme-park |
80 | THEMEPARK_PORT |
|
| Transmission | transmission |
9091 | TRANSMISSION_PORT |
51413 (TCP and UDP) |
| Traefik | traefik |
8080 (dashboard) | TRAEFIK_PORT |
80, 81, 443 and 444 (443 and 444 also UDP) |
| Trilium | trilium |
8080 | TRILIUM_PORT |
|
| Uptime-Kuma | uptime-kuma |
3001 | UPTIMEKUMA_PORT |
|
| Vaultwarden | vaultwarden |
80 | VAULTWARDEN_PORT |
|
| Vikunja | vikunja |
3456 | VIKUNJA_PORT |
|
| Viniplay | viniplay |
8998 | VINIPLAY_PORT |
|
| VS Code | vscode |
8443 | VSCODE_PORT |
|
| Wallos | wallos |
80 | WALLOS_PORT |
|
| Weaviate | weaviate |
8080 | WEAVIATE_PORT |
50051 |
| WG-Easy | wg-easy |
51821 | WGEASY_PORT |
51820 (UDP, the VPN port) |
| What’s Up Docker | wud |
3000 | WUD_PORT |
|
| Wikidocs | wikidocs |
80 | WIKIDOCS_PORT |
|
| XPipe Webtop | xpipe-webtop |
3000 | XPIPEWEBTOP_PORT |
Notes:
- Extra ports are not the web page. Pi-hole port 53 can clash with a service already on your server. See Pi-hole will not start because port 53 is already in use.
- Supabase has many containers. The web page and API go through
supabase-kongon port 8000.supabase-kongalso publishes 8443 (SUPABASE_KONG_HTTPS_PORT). The separatesupabase-poolercontainer publishes 5432 (SUPABASE_POOLER_PORT) and 6543 (SUPABASE_POOLER_PROXY_PORT). Port 5432 is also the default of the PostgreSQL app, so check for a clash if you run both. - Dockpeek, Dockwatch and What’s Up Docker are only on the
socket_proxynetwork, not ondefault. Other apps can’t reach them by container name. Use your server IP and the host port instead. - Nginx Proxy Manager admin page is port 81. Traefik dashboard is port 8080.
Apps on the host network
Section titled “Apps on the host network”These apps use the host network. They have no container name on the Docker network. From another app or device, use your server’s IP address and the port the app listens on.
| App | Port it listens on | .env port variable |
|---|---|---|
| GPTWOL | 5000 by default | GPTWOL_PORT |
| Homebridge | 8581 | HOMEBRIDGE_PORT |
| Netdata | 19999 | NETDATA_PORT |
| Sshwifty | 9182 by default | SSHWIFTY_PORT |
| Cloudflare Tunnel | No web page | None |
| Tailscale | No web page | None |
| ZeroTier | No web page | None |
Homebridge and Netdata always listen on 8581 and 19999. Deployrr asks for HOMEBRIDGE_PORT and NETDATA_PORT at install, but changing them does not move the app to another port.
qBittorrent VPN and Gluetun
Section titled “qBittorrent VPN and Gluetun”The qbittorrent-vpn container shares the network of the gluetun container. It has no network or ports section of its own. When you install qBittorrent VPN, Deployrr adds a port to the Gluetun file: QBITTORRENTVPN_PORT (8082 by default) on your server, 8080 inside.
- In your browser, use
http://YOUR_SERVER_IP:QBITTORRENTVPN_PORT. - From other containers, use
gluetun:8080.
See Connect your apps to each other. To set it up, see Install qBittorrent VPN.
Apps with no web page
Section titled “Apps with no web page”These containers have no web page and publish no port. Gluetun publishes no port until you install qBittorrent VPN.
- Gluetun, Kometa, DeUnhealth, Docker Garbage Collection and Socket Proxy run in the background.
- Traefik Access Log for Dozzle, Traefik Error Log for Dozzle and Traefik Certs Dumper support Traefik.
- Authelia (
authelia), Authentik (authentik), TinyAuth (tinyauth) and Google OAuth (oauth) are login pages. You reach them through Traefik at the address you chose.
Helper containers
Section titled “Helper containers”Some apps start extra containers for their database or cache. You see them in the docker ps list (with the Deployrr bash aliases: dps). Apart from supabase-pooler (see the Supabase note above), they publish no port. Other containers reach them on the default network.
| App | Helper containers |
|---|---|
| Authelia | authelia-redis |
| Authentik | authentik-postgresql, authentik-worker |
| Autobrr | autobrr-postgresql |
| Bookstack | bookstack-mariadb |
| Dockhand | dockhand-postgresql |
| Flowise | flowise-postgresql, flowise-redis |
| GameVault | gamevault-postgresql |
| Guacamole | guacamole-mariadb, guacd |
| Immich | immich-machine-learning, immich-postgresql, immich-redis |
| Langfuse | langfuse-clickhouse, langfuse-minio, langfuse-postgresql, langfuse-redis, langfuse-worker |
| n8n | n8n-postgresql |
| Nextcloud | nextcloud-mariadb, nextcloud-redis |
| Paperless-NGX | paperless-ngx-mariadb, paperless-ngx-redis, gotenberg, tika |
| PdfDing | pdfding-postgresql |
| Scrutiny | scrutiny-influxdb |
| SearXNG | searxng-valkey |
| Speedtest Tracker | speedtest-tracker-mariadb |
| Supabase | supabase (Studio), supabase-analytics, supabase-auth, supabase-db, supabase-edge-functions, supabase-imgproxy, supabase-meta, supabase-pooler, realtime-dev.supabase-realtime, supabase-rest, supabase-storage, supabase-vector |
| Vikunja | vikunja-mariadb |
Folders inside the containers
Section titled “Folders inside the containers”Apps see your folders under different paths than on the server. Use the path in the right column when an app asks you to pick a folder.
Every app keeps its settings in appdata/APP_NAME inside your Docker folder. Most apps mount it at /config. To check an app, look at the volumes section of its file. See Docker folder layout.
| Folder on your server | Path in the container | Apps |
|---|---|---|
| Downloads folder | /data/downloads |
Sonarr, Radarr, Lidarr, Prowlarr, Jackett, qBittorrent, qBittorrent VPN, SABnzbd, NZBGet, Mylar3, Plex, Jellyfin, Emby |
| Media Folders 1 to 3 | /data/media1, /data/media2, /data/media3 |
Sonarr, Radarr, Lidarr, Bazarr, Plex, Jellyfin, Emby, Navidrome, Gonic, Funkwhale, Airsonic-Advanced, Lollypop, Beets, Cloud Commander, Double Commander |
RAM (/dev/shm), for transcoding |
/data/transcode |
Plex, Jellyfin, Emby |
| Books folder | /data/books |
Calibre, Calibre-Web, Kavita, Komga |
| Comics folder | /data/comics |
Komga |
| Photos folder | /data/photos |
DigiKam, Piwigo |
| Audiobooks folder | /audiobooks |
Audiobookshelf |
| Podcasts folder | /podcasts |
Audiobookshelf |
| Your home folder | /data/YOUR_USERNAME |
Cloud Commander, Double Commander, VS Code |
YOUR_USERNAME is your own Linux user name. The home folder is /home/YOUR_USERNAME on the server.
Some apps differ:
- Transmission mounts
Downloads/torrentsat/data/downloads. It mounts the whole Downloads folder at/data/watch. - Beets and Resilio Sync mount the Downloads folder at
/downloads. - Mylar3 mounts the Comics folder at
/comics. - Calibre has the comics line in its file, but switched off.
Which apps have a health check
Section titled “Which apps have a health check”A health check lets Docker mark a container healthy or unhealthy. DeUnhealth restarts a container that is unhealthy. It can only act on containers that have a check. To see how a health check and DeUnhealth work together, watch DeUnhealth guide: health check on qBittorrent at 2:51 (manual Docker Compose setup).
These apps have a health check:
Cleanuparr, Cloudflare Tunnel, Dashy, Dozzle Agent, Flowise, Immich, MariaDB, Paperless-NGX, PostgreSQL, Pulse, qBittorrent VPN, Redis, Authentik and Nginx Proxy Manager.
Most helper database and cache containers have one too, for example n8n-postgresql, nextcloud-mariadb, immich-postgresql and authelia-redis. langfuse-worker, gotenberg, tika, guacd and authentik-worker have none.
Every other app has no health check. Its status never shows unhealthy, so the DeUnhealth label does nothing there.
To check one container, run this. Replace CONTAINER with its container name.
sudo docker inspect --format '{{json .State.Health}}' CONTAINERIf the output is null, the container has no health check. Otherwise the output shows its status (healthy, unhealthy or starting) and the last checks.
Check your own files
Section titled “Check your own files”The tables show what Deployrr sets up by default. Your own files can differ.
- Container name, ports, folders and health check: open
compose/HOSTNAME/APP.ymlinside your Docker folder. ReplaceHOSTNAMEwith your server’s host name andAPPwith the app. Look forcontainer_name,ports,volumesandhealthcheck. - Ports you picked: they are in your
.envfile. See Edit .env values and secrets. - A second copy of an app: it has its own container name and its own port. See Run a second copy of an app.

